Staged Global Network Policy

A staged global network policy resource (StagedGlobalNetworkPolicy) represents an ordered set of rules which are applied to a collection of endpoints that match a label selector. These rules are used to preview network behavior and do not to enforce network traffic. For enforcing network traffic, see global network policy resource.

StagedGlobalNetworkPolicy is not a namespaced resource. StagedGlobalNetworkPolicy applies to workload endpoint resources in all namespaces, and to host endpoint resources. Select a namespace in a StagedGlobalNetworkPolicy in the standard selector by using projectcalico.org/namespace as the label name and a namespace name as the value to compare against, e.g., projectcalico.org/namespace == "default". See staged network policy resource for staged namespaced network policy.

StagedGlobalNetworkPolicy resources can be used to define network connectivity rules between groups of Calico Cloud endpoints and host endpoints.

StagedGlobalNetworkPolicies are organized into tiers, which provide an additional layer of ordering—in particular, note that the Pass action skips to the next tier, to enable hierarchical security policy.

For kubectl commands, the following case-insensitive aliases may be used to specify the resource type on the CLI: stagedglobalnetworkpolicy.projectcalico.org, stagedglobalnetworkpolicies.projectcalico.org and abbreviations such as stagedglobalnetworkpolicy.p and stagedglobalnetworkpolicies.p.

Sample YAML

This sample policy allows TCP traffic from frontend endpoints to port 6379 on database endpoints.

apiVersion: projectcalico.org/v3
kind: StagedGlobalNetworkPolicy
metadata:
  name: internal-access.allow-tcp-6379
spec:
  tier: internal-access
  selector: role == 'database'
  types:
    - Ingress
    - Egress
  ingress:
    - action: Allow
      protocol: TCP
      source:
        selector: role == 'frontend'
      destination:
        ports:
          - 6379
  egress:
    - action: Allow

Definition

Metadata

Field	Description	Accepted Values	Schema	Default
name	The name of the network policy. Required.	Alphanumeric string with optional ., _, or -.	string

Spec

Field	Description	Accepted Values	Schema	Default
order	Controls the order of precedence. Calico Cloud applies the policy with the lowest value first.		float
tier	Name of the tier this policy belongs to.		string	default
selector	Selects the endpoints to which this policy applies.		selector	all()
serviceAccountSelector	Selects the service account(s) to which this policy applies. Select all service accounts in the cluster with a specific name using the projectcalico.org/name label.		selector	all()
namespaceSelector	Selects the namespace(s) to which this policy applies. Select a specific namespace by name using the projectcalico.org/name label.		selector	all()
types	Applies the policy based on the direction of the traffic. To apply the policy to inbound traffic, set to Ingress. To apply the policy to outbound traffic, set to Egress. To apply the policy to both, set to Ingress, Egress.	Ingress, Egress	List of strings	Depends on presence of ingress/egress rules*
ingress	Ordered list of ingress rules applied by policy.		List of Rule
egress	Ordered list of egress rules applied by this policy.		List of Rule
doNotTrack**	Indicates to apply the rules in this policy before any data plane connection tracking, and that packets allowed by these rules should not be tracked.	true, false	boolean	false
preDNAT**	Indicates to apply the rules in this policy before any DNAT.	true, false	boolean	false
applyOnForward**	Indicates to apply the rules in this policy on forwarded traffic as well as to locally terminated traffic.	true, false	boolean	false
performanceHints	Contains a list of hints to Calico's policy engine to help process the policy more efficiently. Hints never change the enforcement behaviour of the policy. The available hints are described below.	AssumeNeededOnEveryNode	List of strings

* If types has no value, Calico Cloud defaults as follows.

Ingress Rules Present	Egress Rules Present	Types value
No	No	Ingress
Yes	No	Ingress
No	Yes	Egress
Yes	Yes	Ingress, Egress

** The doNotTrack and preDNAT and applyOnForward fields are meaningful only when applying policy to a host endpoint.

Only one of doNotTrack and preDNAT may be set to true (in a given policy). If they are both false, or when applying the policy to a workload endpoint, the policy is enforced after connection tracking and any DNAT.

applyOnForward must be set to true if either doNotTrack or preDNAT is true because for a given policy, any untracked rules or rules before DNAT will in practice apply to forwarded traffic.

See Using Calico Cloud to Secure Host Interfaces for how doNotTrack and preDNAT and applyOnForward can be useful for host endpoints.

Rule

A single rule matches a set of packets and applies some action to them. When multiple rules are specified, they are executed in order.

Field	Description	Accepted Values	Schema	Default
metadata	Per-rule metadata.		RuleMetadata
action	Action to perform when matching this rule.	Allow, Deny, Log, Pass	string
protocol	Positive protocol match.	TCP, UDP, ICMP, ICMPv6, SCTP, UDPLite, 1-255	string | integer
notProtocol	Negative protocol match.	TCP, UDP, ICMP, ICMPv6, SCTP, UDPLite, 1-255	string | integer
icmp	ICMP match criteria.		ICMP
notICMP	Negative match on ICMP.		ICMP
ipVersion	Positive IP version match.	4, 6	integer
source	Source match parameters.		EntityRule
destination	Destination match parameters.		EntityRule
http	Match HTTP request parameters. Application layer policy must be enabled to use this field.		HTTPMatch

After a Log action, processing continues with the next rule; Allow and Deny are immediate and final and no further rules are processed.

An action of Pass in a NetworkPolicy or GlobalNetworkPolicy will skip over the remaining policies and jump to the first profile assigned to the endpoint, applying the policy configured in the profile; if there are no Profiles configured for the endpoint the default applied action is Deny.

RuleMetadata

Metadata associated with a specific rule (rather than the policy as a whole). The contents of the metadata does not affect how a rule is interpreted or enforced; it is simply a way to store additional information for use by operators or applications that interact with Calico Cloud.

Field	Description	Schema	Default
annotations	Arbitrary non-identifying metadata.	map of string to string

Example:

metadata:
  annotations:
    app: database
    owner: devops

Annotations follow the same rules as Kubernetes for valid syntax and character set.

On Linux with the iptables dataplane, rule annotations are rendered as comments in the form -m comment --comment "<key>=<value>" on the iptables rule(s) that correspond to the Calico Cloud rule.

ICMP

Field	Description	Accepted Values	Schema	Default
type	Match on ICMP type.	Can be integer 0-254	integer
code	Match on ICMP code.	Can be integer 0-255	integer

EntityRule

Entity rules specify the attributes of the source or destination of a packet that must match for the rule as a whole to match. Packets can be matched on combinations of:

• Identity of the source/destination, by using Selectors or by specifying a particular Kubernetes Service. Selectors can match workload endpoints, host endpoints and (namespaced or global) network sets.
• Source/destination IP address, protocol and port.

If the rule contains multiple match criteria (for example, an IP and a port) then all match criteria must match for the rule as a whole to match a packet.

Field	Description	Accepted Values	Schema	Default
nets	Match packets with IP in any of the listed CIDRs.	List of valid IPv4 CIDRs or list of valid IPv6 CIDRs (IPv4 and IPv6 CIDRs shouldn't be mixed in one rule)	list of cidrs
notNets	Negative match on CIDRs. Match packets with IP not in any of the listed CIDRs.	List of valid IPv4 CIDRs or list of valid IPv6 CIDRs (IPv4 and IPv6 CIDRs shouldn't be mixed in one rule)	list of cidrs
selector	Positive match on selected endpoints. If a namespaceSelector is also defined, the set of endpoints this applies to is limited to the endpoints in the selected namespaces.	Valid selector	selector
notSelector	Negative match on selected endpoints. If a namespaceSelector is also defined, the set of endpoints this applies to is limited to the endpoints in the selected namespaces.	Valid selector	selector
namespaceSelector	Positive match on selected namespaces. If specified, only workload endpoints in the selected Kubernetes namespaces are matched. Matches namespaces based on the labels that have been applied to the namespaces. Defines the scope that selectors will apply to, if not defined then selectors apply to the NetworkPolicy's namespace. Match a specific namespace by name using the projectcalico.org/name label. Select the non-namespaced resources like GlobalNetworkSet(s), host endpoints to which this policy applies by using global() selector.	Valid selector	selector
ports	Positive match on the specified ports		list of ports
domains	Positive match on domain names.	List of exact or wildcard domain names	list of strings
notPorts	Negative match on the specified ports		list of ports
serviceAccounts	Match endpoints running under service accounts. If a namespaceSelector is also defined, the set of service accounts this applies to is limited to the service accounts in the selected namespaces.		ServiceAccountMatch
services	Match the specified service(s). If specified on egress rule destinations, no other selection criteria can be set. If specified on ingress rule sources, only positive or negative matches on ports can be specified.		ServiceMatch

note

You cannot mix IPv4 and IPv6 CIDRs in a single rule using nets or notNets. If you need to match both, create 2 rules.

Selector performance in EntityRules

When rendering policy into the dataplane, Calico Cloud must identify the endpoints that match the selectors in all active rules. This calculation is optimized for certain common selector types. Using the optimized selector types reduces CPU usage (and policy rendering time) by orders of magnitude. This becomes important at high scale (hundreds of active rules, hundreds of thousands of endpoints).

The optimized operators are as follows:

• label == "value"
• label in { 'v1', 'v2' }
• has(label)
• <expression 1> && <expression 2> is optimized if either <expression 1> or <expression 2> is optimized.

The following perform like has(label). All endpoints with the label will be scanned to find matches:

• label contains 's'
• label starts with 's'
• label ends with 's'

The other operators, and in particular, all(), !, || and != are not optimized.

Examples:

• a == 'b' - optimized
• a == 'b' && has(c) - optimized
• a == 'b' || has(c) - not optimized due to use of ||
• c != 'd' - not optimized due to use of !=
• !has(a) - not optimized due to use of !
• a == 'b' && c != 'd' - optimized, a =='b' is optimized so a == 'b' && <anything> is optimized.
• c != 'd' && a == 'b' - optimized, a =='b' is optimized so <anything> && a == 'b' is optimized.

Exact and wildcard domain names

The domains field is only valid for egress Allow rules. It restricts the rule to apply only to traffic to one of the specified domains. If this field is specified, the parent Rule's action must be Allow, and nets and selector must both be left empty.

When a configured domain name has no wildcard (*), it matches exactly that domain name. For example:

• microsoft.com
• tigera.io

With a single asterisk in any part of the domain name, it matches 1 or more path components at that position. For example:

• *.google.com matches www.google.com and www.ipv6.google.com, but not google.com
• www.*.com matches www.sun.com and www.apple.com, but not www.com
• update.*.mycompany.com matches update.tools.mycompany.com, update.secure.suite.mycompany.com, and so on

Not supported are:

• Multiple wildcards in the same domain, for example: *.*.mycompany.com
• Asterisks that are not the entire component, for example: www.g*.com
• More general wildcards, such as regular expressions

note

Calico Cloud implements policy for domain names by learning the corresponding IPs from DNS, then programming rules to allow those IPs. This means that if multiple domain names A, B and C all map to the same IP, and there is domain-based policy to allow A, traffic to B and C will be allowed as well.

Selector

A label selector is an expression which either matches or does not match a resource based on its labels.

Calico Cloud label selectors support a number of operators, which can be combined into larger expressions using the boolean operators and parentheses.

Expression	Meaning
Logical operators
( <expression> )	Matches if and only if <expression> matches. (Parentheses are used for grouping expressions.)
! <expression>	Matches if and only if <expression> does not match. Tip: ! is a special character at the start of a YAML string, if you need to use ! at the start of a YAML string, enclose the string in quotes.
<expression 1> && <expression 2>	"And": matches if and only if both <expression 1>, and, <expression 2> matches
<expression 1> || <expression 2>	"Or": matches if and only if either <expression 1>, or, <expression 2> matches.
Match operators
all()	Match all in-scope resources. To match no resources, combine this operator with ! to form !all().
global()	Match all non-namespaced resources. Useful in a namespaceSelector to select global resources such as global network sets.
k == 'v'	Matches resources with the label 'k' and value 'v'.
k != 'v'	Matches resources without label 'k' or with label 'k' and value not equal to v
has(k)	Matches resources with label 'k', independent of value. To match pods that do not have label k, combine this operator with ! to form !has(k)
k in { 'v1', 'v2' }	Matches resources with label 'k' and value in the given set
k not in { 'v1', 'v2' }	Matches resources without label 'k' or with label 'k' and value not in the given set
k contains 's'	Matches resources with label 'k' and value containing the substring 's'
k starts with 's'	Matches resources with label 'k' and value starting with the substring 's'
k ends with 's'	Matches resources with label 'k' and value ending with the substring 's'

Operators have the following precedence:

• Highest: all the match operators
• Parentheses ( ... )
• Negation with !
• Conjunction with &&
• Lowest: Disjunction with ||

For example, the expression

! has(my-label) || my-label starts with 'prod' && role in {'frontend','business'}

Would be "bracketed" like this:

((!(has(my-label)) || ((my-label starts with 'prod') && (role in {'frontend','business'}))

It would match:

• Any resource that did not have label "my-label".
• Any resource that both:
  • Has a value for my-label that starts with "prod", and,
  • Has a role label with value either "frontend", or "business".

Ports

Calico Cloud supports the following syntaxes for expressing ports.

Syntax	Example	Description
int	80	The exact (numeric) port specified
start:end	6040:6050	All (numeric) ports within the range start ≤ x ≤ end
string	named-port	A named port, as defined in the ports list of one or more endpoints

An individual numeric port may be specified as a YAML/JSON integer. A port range or named port must be represented as a string. For example, this would be a valid list of ports:

ports: [8080, '1234:5678', 'named-port']

Named ports

Using a named port in an EntityRule, instead of a numeric port, gives a layer of indirection, allowing for the named port to map to different numeric values for each endpoint.

For example, suppose you have multiple HTTP servers running as workloads; some exposing their HTTP port on port 80 and others on port 8080. In each workload, you could create a named port called http-port that maps to the correct local port. Then, in a rule, you could refer to the name http-port instead of writing a different rule for each type of server.

note

Since each named port may refer to many endpoints (and Calico Cloud has to expand a named port into a set of endpoint/port combinations), using a named port is considerably more expensive in terms of CPU than using a simple numeric port. We recommend that they are used sparingly, only where the extra indirection is required.

ServiceAccountMatch

A ServiceAccountMatch matches service accounts in an EntityRule.

Field	Description	Schema
names	Match service accounts by name	list of strings
selector	Match service accounts by label	selector

ServiceMatch

A ServiceMatch matches a service in an EntityRule.

Field	Description	Schema
name	The service's name.	string
namespace	The service's namespace.	string

Performance Hints

Performance hints provide a way to tell Calico Cloud about the intended use of the policy so that it may process it more efficiently. Currently only one hint is defined:

• AssumeNeededOnEveryNode: normally, Calico Cloud only calculates a policy's rules and selectors on nodes where the policy is actually in use (i.e. its selector matches a local endpoint). This saves work in most cases. The AssumeNeededOnEveryNode hint tells Calico Cloud to treat the policy as "in use" on every node. This is useful for large policy sets that are known to apply to all (or nearly all) endpoints. It effectively "preloads" the policy on every node so that there is less work to do when the first endpoint matching the policy shows up. It also prevents work from being done to tear down the policy when the last endpoint is drained.

Supported operations

Datastore type	Create/Delete	Update	Get/List	Notes
Kubernetes API datastore	Yes	Yes	Yes