System requirements

OpenShift requirements

See OpenShift Container Platform.

Node requirements

• x86-64 or arm64 processor with at least 2 cores, 8.0GB RAM and 20 GB free disk space

• Linux kernel 3.10 or later with required dependencies. The following distributions have the required kernel, its dependencies, and are known to work well with Calico Enterprise and OpenShift.

  • Red Hat Enterprise Linux CoreOS

• If your node is running RHEL 8 or RHEL 9, you must install a specialized policy package before you install Calico Enterprise. With this package, Calico Enterprise can use SELinux contexts in a series of rules that allow it to interact with persistent and ephemeral data in nonstandard host system locations.

  • If your node has RHEL 8 installed, then run the following command:

    dnf install https://downloads.tigera.io/ee/archives/calico-selinux-1.0-1.el8.noarch.rpm

  • If your node has RHEL 9 installed, then run the following command:

    dnf install https://downloads.tigera.io/ee/archives/calico-selinux-1.0-1.el9.noarch.rpm

• Calico Enterprise must be able to manage cali*interfaces on the host. When IPIP is enabled (the default),Calico Enterprise also needs to be able to manage tunl*interfaces. When VXLAN is enabled, Calico Enterprise also needs to be able to manage the vxlan.calico interface.

  note

  Many Linux distributions, such as most of the above, include NetworkManager. By default, NetworkManager does not allowCalico Enterprise to manage interfaces. If your nodes have NetworkManager, complete the steps in Preventing NetworkManager from controlling Calico Enterprise interfaces before installing Calico Enterprise.

• If your Linux distribution comes with installed Firewalld or another iptables manager it should be disabled. These may interfere with rules added by Calico Enterprise and result in unexpected behavior.

  note

  If a host firewall is needed, it can be configured by Calico Enterprise HostEndpoint and GlobalNetworkPolicy. More information about configuration at Security for host.

• In order to properly run Elasticsearch, nodes must be configured according to the Elasticsearch system configuration documentation.

• The Typha autoscaler requires a minimum number of Linux worker nodes based on total number of schedulable nodes.

  Total schedulable nodes	Required Linux nodes for Typha replicas
  1	1
  2	2
  3	3
  up to 250	4
  up to 500	5
  up to 1000	6
  up to 1500	7
  up to 2000	8
  2000 or more	10

Network requirements

Ensure that your hosts and firewalls allow the necessary traffic based on your configuration. See Component architecture to view the following components.

Configuration	Host(s)	Port/protocol
Calico Enterprise networking options	IP-in-IP (default)	Protocol number 4
	BGP	TCP 179
	VXLAN	UDP 4789
	Wireguard	UDP 51820 (default)
	IPv6 Wireguard	UDP 51821 (default)
Cluster scaling	Any Calico Enterprise networking option above with Typha agents enabled	TCP 5473 (default)
APIs	Kubernetes API (kube-apiserver) to access Kubernetes API datastore	Often TCP 443 or 8443*
	Calico Enterprise API server	TCP 8080 and 5443 (default)
Nodes	calico-node (Felix, BIRD, confd)	TCP 9090 (default)
Component metrics	Prometheus metrics	TCP 9081 (default)
	Prometheus BGP metrics	TCP 9900 (default)
	Prometheus API service	TCP 9090 (default)
	Prometheus Alertmanager	TCP 9093 (default)
Logs and storage	Elasticsearch with fluentd datastore	TCP 9200 (default)
	Elasticssearch for cloud (ECK)	TCP 9443 (default)
	Elasticsearch gateway	TCP 5444 (default)
Visibility and troubleshooting	Kibana	TCP 5601 (default)
	Packet capture API	TCP 8444 (default)
	Calico Enterprise Manager UI	TCP 9443 (default)
Intrusion Detection System (IDS)	Calico Enterprise intrusion detection	TCP 5443 (default)
Compliance	Calico Enterprise compliance	TCP 5443 (default)
Multi-cluster management	Additional port required for Manager UI	TCP 9449
Egress gateway	Calico Enterprise egress gateway	UDP 4790

* The value passed to kube-apiserver using the --secure-portflag. If you cannot locate this, check the targetPort value returned by  kubectl get svc kubernetes -o yaml.

Privilege requirements

Ensure that Calico Enterprise has the CAP_SYS_ADMIN privilege.

The simplest way to provide the necessary privilege is to run Calico Enterprise as root or in a privileged container.

Kernel Dependencies

tip

If you are using one of the recommended distributions, you will already satisfy these.

Due to the large number of distributions and kernel version out there, it’s hard to be precise about the names of the particular kernel modules that are required to run Calico Enterprise. However, in general, you’ll need:

• The iptables modules (both the “legacy” and “nft” variants are supported). These are typically broken up into many small modules, one for each type of match criteria and one for each type of action. Calico Enterprise requires:

  • The “base” modules (including the IPv6 versions if IPv6 is enabled in your cluster).
  • At least the following match criteria: set, rpfilter, addrtype, comment, conntrack, icmp, tcp, udp, ipvs, icmpv6 (if IPv6 is enabled in your kernel), mark, multiport, rpfilter, sctp, ipvs (if usingkube-proxy in IPVS mode).
  • At least the following actions: REJECT, ACCEPT, DROP, LOG.

• IP sets support.

• Netfilter Conntrack support compiled in (with SCTP support if using SCTP).

• IPVS support if using kube-proxy in IPVS mode.

• IPIP, VXLAN, Wireguard support, if using Calico Enterprise networking in one of those modes.

• eBPF (including the tc hook support) and XDP (if you want to use the eBPF dataplane).