Skip to main content
Calico Enterprise 3.19 (latest) documentation

Protect hosts and VMs

Big picture​

Use Calico Enterprise network policy to restrict traffic to/from hosts and VMs.

Value​

Restricting traffic between hosts and the outside world is not unique to Calico Enterprise; many solutions provide this capability. However, the advantage of using Calico Enterprise to protect the host is you can use the same Calico Enterprise policy configuration as workloads. You only need to learn one tool. Write a cluster-wide policy, and it is immediately applied to every host.

Concepts​

Hosts and workloads​

In the context of Calico Enterprise configuration, a workload is a containerized compute instance running in Kubernetes. A host is a computer or virtual machine (VM) that acts as a node in a Kubernetes cluster or that runs application workloads outside of Kubernetes. Calico Enterprise is unique in that it can enforce network policy and provide visibility in a consistent way for both workloads and hosts, even if those hosts are on-premises servers or VMs running in the public clou.

Host endpoints​

Each host has one or more network interfaces that it uses to communicate externally. You can use Calico Enterprise network policy to secure these interfaces (called host endpoints). Calico Enterprise host endpoints can have labels, and they work the same as labels on workload endpoints. The network policy rules can apply to both workload and host endpoints using label selectors.

Failsafe rules​

It is easy to inadvertently cut all host connectivity because of nonexistent or misconfigured network policy. To avoid this, Calico Enterprise provides failsafe rules with default/configurable ports that are open on all host endpoints.

Default behavior of workload to host traffic​

By default, Calico Enterprise blocks all connections from a workload to its local host. You can control whether connections from a workload endpoint to its local host are dropped, returned, or accepted using a simple parameter.

Calico Enterprise allows all connections from processes running on the host to guest workloads on the host. This allows host processes to run health checks and debug guest workloads.

Default behavior of external traffic to/from host​

If a host endpoint is added and network policy is not in place, the Calico Enterprise default is to deny traffic to/from that endpoint (except for traffic allowed by failsafe rules). For host endpoints, Calico Enterprise blocks traffic only to/from interfaces that it’s been explicitly told about in network policy. Traffic to/from other interfaces is ignored.

Other host protection​

In terms of design consistency in Calico Enterprise, you may wonder about the following use cases.

Does Calico Enterprise protect a local host from workloads?
Yes. DefaultEndpointToHostAction controls whether or not workloads can access their local host.

Does Calico Enterprise protect a workload from the host it is running on?
No. Calico Enterprise allows connections the host makes to the workloads running on that host. Some orchestrators like Kubernetes depend on this connectivity for health checking the workload. Moreover, processes running on the local host are often privileged enough to override local Calico Enterprise policy. Be very cautious with the processes that you allow to run in the host's root network namespace.

Before you begin...​

If you are already running Calico Enterprise for Kubernetes, you are good to go. If you want to install Calico Enterprise on a non-cluster machine for host protection only, see Non-cluster hosts.

How to​

Avoid accidentally cutting all host connectivity​

To avoid inadvertently cutting all host connectivity because of nonexistent or misconfigured network policy, Calico Enterprise uses failsafe rules that open specific ports and CIDRs on all host endpoints.

Review the following table to determine if the defaults work for your implementation. If not, change the default ports using the parameters, FailsafeInboundHostPorts and FailsafeOutboundHostPorts in Configuring Felix.

PortProtocolCIDRDirectionPurpose
22TCP0.0.0.0/0InboundSSH access
53UDP0.0.0.0/0OutboundDNS queries
67UDP0.0.0.0/0OutboundDHCP access
68UDP0.0.0.0/0InboundDHCP access
179TCP0.0.0.0/0Inbound & OutboundBGP access (Calico Enterprise networking)
2379TCP0.0.0.0/0Inbound & Outboundetcd access
2380TCP0.0.0.0/0Inbound & Outboundetcd access
6443TCP0.0.0.0/0Inbound & OutboundKubernetes API server access
6666TCP0.0.0.0/0Inbound & Outboundetcd self-hosted service access
6667TCP0.0.0.0/0Inbound & Outboundetcd self-hosted service access

Use policy to restrict host traffic​

Step 1: Create policy to restrict host traffic​

Although failsafe rules provide protection from removing all connectivity to a host, you should create a GlobalNetworkPolicy policy that restricts host traffic.

In the following example, we use a GlobalNetworkPolicy that applies to all worker nodes (defined by a label). Ingress SSH access is allowed from a defined "management" subnet.

Ingress traffic is also allowed for ICMP, and on TCP port 10250 (default kubelet port). Egress traffic is allowed to etcd on a particular IP, and UDP on port 53 and 67 for DNS and DHCP.

apiVersion: projectcalico.org/v3
kind: GlobalNetworkPolicy
metadata:
  name: k8s-worker
spec:
  selector: "role == 'k8s-worker'"
  order: 0
  ingress:
    - action: Allow
      protocol: TCP
      source:
        nets:
          - '<your management CIDR>'
      destination:
        ports: [22]
    - action: Allow
      protocol: ICMP
    - action: Allow
      protocol: TCP
      destination:
        ports: [10250]
  egress:
    - action: Allow
      protocol: TCP
      destination:
        nets:
          - '<your etcd IP>/32'
        ports: [2379]
    - action: Allow
      protocol: UDP
      destination:
        ports: [53, 67]

Step 2: Create host endpoints​

For each host point that you want to secure with policy, you must create a HostEndpoint object. To do that, you need the name of the Calico Enterprise node on the host that owns the interface; in most cases, it is the same as the hostname of the host.

In the following example, we create a HostEndpoint for the host named my-host with the interface named eth0, with IP 10.0.0.1. Note that the value for node: must match the hostname used on the Calico Enterprise node object.

When the HostEndpoint is created, traffic to or from the interface is dropped unless policy is in place.

apiVersion: projectcalico.org/v3
kind: HostEndpoint
metadata:
  name: my-host-eth0
  labels:
    role: k8s-worker
    environment: production
spec:
  interfaceName: eth0
  node: my-host
  expectedIPs: ['10.0.0.1']

Control default behavior of workload endpoint to host traffic​

The default Calico Enterprise behavior blocks all connections from workloads to their local host (after traffic passes any egress policy applied to the workload). You can change this behavior using the DefaultEndpointToHostAction parameter in Felix configuration.

This parameter works at the IP table level, where you can specify packet behavior to Drop (default), Accept, or Return.

To change this parameter for all hosts, edit the FelixConfiguration object named “default.”

  1. Get a copy of the object to edit.

    kubectl get felixconfiguration default -o yaml > default-felix-config.yaml

  2. Open the file in a text editor and add the parameter, defaultEndpointToHostAction. For example:

    apiVersion: projectcalico.org/v3
    kind: FelixConfiguration
    metadata:
      name: default
    spec:
      ipipEnabled: true
      logSeverityScreen: Info
      reportingInterval: 0s
      defaultEndpointToHostAction: Accept

  3. Update the FelixConfiguration on the cluster.

    kubectl apply -f default-felix-config.yaml

Additional resources​