Secure Calico Enterprise Prometheus endpoints

About securing access to Calico Enterprise's metrics endpoints

When using Calico Enterprise with Prometheus metrics enabled, we recommend using network policy to limit access to Calico Enterprise's metrics endpoints.

Prerequisites

• Calico Enterprise is installed with Prometheus metrics reporting enabled.
• calicoctl is installed in your PATH and configured to access the data store.

Choosing an approach

This guide provides two example workflows for creating network policies to limit access to Calico Enterprise's Prometheus metrics. Choosing an approach depends on your requirements.

• Using a deny-list approach

  This approach allows all traffic to your hosts by default, but lets you limit access to specific ports using Calico Enterprise policy. This approach allows you to restrict access to specific ports, while leaving other host traffic unaffected.

• Using an allow-list approach

  This approach denies traffic to and from your hosts by default, and requires that all desired communication be explicitly allowed by a network policy. This approach is more secure because only explicitly-allowed traffic will get through, but it requires you to know all the ports that should be open on the host.

Using a deny-list approach

Overview

The basic process is as follows:

1. Create a default network policy that allows traffic to and from your hosts.
2. Create host endpoints for each node that you'd like to secure.
3. Create a network policy that denies unwanted traffic to the Calico Enterprise metrics endpoints.
4. Apply labels to allow access to the Prometheus metrics.

Example for cnx-node

This example shows how to limit access to the cnx-node Prometheus metrics endpoints.

1. Create a default network policy to allow host traffic

   First, create a default-allow policy. Do this first to avoid a drop in connectivity when adding the host endpoints later, since host endpoints with no policy default to deny.

   To do this, create a file named default-host-policy.yaml with the following contents.

   apiVersion: projectcalico.org/v3
   kind: GlobalNetworkPolicy
   metadata:
     name: default-host
   spec:
     # Select all Calico Enterprise nodes.
     selector: running-calico == "true"
     order: 5000
     ingress:
       - action: Allow
     egress:
       - action: Allow

   Then, use kubectl to apply this policy.

   kubectl apply -f default-host-policy.yaml

2. List the nodes on which Calico Enterprise is running with the following command.

   calicoctl get nodes

   In this case, we have two nodes in the cluster.

   NAME
   kubeadm-master
   kubeadm-node-0

3. Create host endpoints for each Calico Enterprise node.

   Create a file named host-endpoints.yaml containing a host endpoint for each node listed above. In this example, the contents would look like this.

   apiVersion: projectcalico.org/v3
   kind: HostEndpoint
   metadata:
     name: kubeadm-master.eth0
     labels:
       running-calico: 'true'
   spec:
     node: kubeadm-master
     interfaceName: eth0
     expectedIPs:
       - 10.100.0.15
   ---
   apiVersion: projectcalico.org/v3
   kind: HostEndpoint
   metadata:
     name: kubeadm-node-0.eth0
     labels:
       running-calico: 'true'
   spec:
     node: kubeadm-node-0
     interfaceName: eth0
     expectedIPs:
       - 10.100.0.16

   In this file, replace eth0 with the desired interface name on each node, and populate the expectedIPs section with the IP addresses on that interface.

   Note the use of a label to indicate that this host endpoint is running Calico Enterprise. The label matches the selector of the network policy created in step 1.

   Then, use kubectl to apply the host endpoints with the following command.

   kubectl apply -f host-endpoints.yaml

4. Create a network policy that restricts access to the cnx-node Prometheus metrics port.

   Now let's create a network policy that limits access to the Prometheus metrics port such that only endpoints with the label calico-prometheus-access: true can access the metrics.

   To do this, create a file named calico-prometheus-policy.yaml with the following contents.

   # Allow traffic to Prometheus only from sources that are
   # labeled as such, but don't impact any other traffic.
   apiVersion: projectcalico.org/v3
   kind: GlobalNetworkPolicy
   metadata:
     name: restrict-calico-node-prometheus
   spec:
     # Select all Calico Enterprise nodes.
     selector: running-calico == "true"
     order: 500
     types:
       - Ingress
     ingress:
       # Deny anything that tries to access the Prometheus port
       # but that doesn't match the necessary selector.
       - action: Deny
         protocol: TCP
         source:
           notSelector: calico-prometheus-access == "true"
         destination:
           ports:
             - 9091

   This policy selects all endpoints that have the label running-calico: true, and enforces a single ingress deny rule. The ingress rule denies traffic to port 9091 unless the source of traffic has the label calico-prometheus-access: true, meaning all Calico Enterprise workload endpoints, host endpoints, and global network sets that do not have the label, as well as any other network endpoints unknown to Calico Enterprise.

   Then, use kubectl to apply this policy.

   kubectl apply -f calico-prometheus-policy.yaml

5. Apply labels to any endpoints that should have access to the metrics.

   At this point, only endpoints that have the label calico-prometheus-access: true can reach Calico Enterprise's Prometheus metrics endpoints on each node. To grant access, simply add this label to the desired endpoints.

   For example, to allow access to a Kubernetes pod you can run the following command.

   kubectl label pod my-prometheus-pod calico-prometheus-access=true

   If you would like to grant access to a specific IP network, you can create a global network set using kubectl.

   For example, you might want to grant access to your management subnets.

   apiVersion: projectcalico.org/v3
   kind: GlobalNetworkSet
   metadata:
     name: calico-prometheus-set
     labels:
       calico-prometheus-access: 'true'
   spec:
     nets:
       - 172.15.0.0/24
       - 172.101.0.0/24

Additional steps for Typha deployments

If your Calico Enterprise installation uses the Kubernetes API datastore and has greater than 50 nodes, it is likely that you have installed Typha. This section shows how to use an additional network policy to secure the Typha Prometheus endpoints.

After following the steps above, create a file named typha-prometheus-policy.yaml with the following contents.

# Allow traffic to Prometheus only from sources that are
# labeled as such, but don't impact any other traffic.
apiVersion: projectcalico.org/v3
kind: GlobalNetworkPolicy
metadata:
  name: restrict-calico-node-prometheus
spec:
  # Select all Calico Enterprise nodes.
  selector: running-calico == "true"
  order: 500
  types:
    - Ingress
  ingress:
    # Deny anything that tries to access the Prometheus port
    # but that doesn't match the necessary selector.
    - action: Deny
      protocol: TCP
      source:
        notSelector: calico-prometheus-access == "true"
      destination:
        ports:
          - 9093

This policy selects all endpoints that have the label running-calico: true, and enforces a single ingress deny rule. The ingress rule denies traffic to port 9093 unless the source of traffic has the label calico-prometheus-access: true, meaning all Calico Enterprise workload endpoints, host endpoints, and global network sets that do not have the label, as well as any other network endpoints unknown to Calico Enterprise.

Then, use kubectl to apply this policy.

kubectl apply -f typha-prometheus-policy.yaml

Example for kube-controllers

If your Calico Enterprise installation exposes metrics from kube-controllers, you can limit access to those metrics with the following network policy.

Create a file named kube-controllers-prometheus-policy.yaml with the following contents.

apiVersion: projectcalico.org/v3
kind: NetworkPolicy
metadata:
  name: restrict-kube-controllers-prometheus
  namespace: calico-system
spec:
  # Select kube-controllers.
  selector: k8s-app == "calico-kube-controllers"
  order: 500
  types:
    - Ingress
  ingress:
    # Deny anything that tries to access the Prometheus port
    # but that doesn't match the necessary selector.
    - action: Deny
      protocol: TCP
      source:
        notSelector: calico-prometheus-access == "true"
      destination:
        ports:
          - 9094

note

The above policy is installed in the calico-system namespace. If your cluster has Calico Enterprise installed in the kube-system namespace, you will need to create the policy in that namespace instead.

Then, use calicoctl to apply this policy.

kubectl apply -f kube-controllers-prometheus-policy.yaml

Using an allow-list approach

Overview

The basic process is as follows:

1. Create host endpoints for each node that you'd like to secure.
2. Create a network policy that allows desired traffic to the Calico Enterprise metrics endpoints.
3. Apply labels to allow access to the Prometheus metrics.

Example for cnx-node

1. List the nodes on which Calico Enterprise is running with the following command.

   calicoctl get nodes

   In this case, we have two nodes in the cluster.

   NAME
   kubeadm-master
   kubeadm-node-0

2. Create host endpoints for each Calico Enterprise node.

   Create a file named host-endpoints.yaml containing a host endpoint for each node listed above. In this example, the contents would look like this.

   apiVersion: projectcalico.org/v3
   kind: HostEndpoint
   metadata:
     name: kubeadm-master.eth0
     labels:
       running-calico: 'true'
   spec:
     node: kubeadm-master
     interfaceName: eth0
     expectedIPs:
       - 10.100.0.15
   ---
   apiVersion: projectcalico.org/v3
   kind: HostEndpoint
   metadata:
     name: kubeadm-node-0.eth0
     labels:
       running-calico: 'true'
   spec:
     node: kubeadm-node-0
     interfaceName: eth0
     expectedIPs:
       - 10.100.0.16

   In this file, replace eth0 with the desired interface name on each node, and populate the expectedIPs section with the IP addresses on that interface.

   Note the use of a label to indicate that this host endpoint is running Calico Enterprise. The label matches the selector of the network policy created in step 1.

   Then, use kubectl to apply the host endpoints with the following command. This will prevent all traffic to and from the host endpoints.

   kubectl apply -f host-endpoints.yaml
   note

   Calico Enterprise allows some traffic as a failsafe even after applying this policy. This can be adjusted using the failsafeInboundHostPorts and failsafeOutboundHostPorts options on the FelixConfiguration resource.

3. Create a network policy that allows access to the cnx-node Prometheus metrics port.

   Now let's create a network policy that allows access to the Prometheus metrics port such that only endpoints with the label calico-prometheus-access: true can access the metrics.

   To do this, create a file named calico-prometheus-policy.yaml with the following contents.

   apiVersion: projectcalico.org/v3
   kind: GlobalNetworkPolicy
   metadata:
     name: restrict-calico-node-prometheus
   spec:
     # Select all Calico Enterprise nodes.
     selector: running-calico == "true"
     order: 500
     types:
       - Ingress
     ingress:
       # Allow traffic from selected sources to the Prometheus port.
       - action: Allow
         protocol: TCP
         source:
           selector: calico-prometheus-access == "true"
         destination:
           ports:
             - 9091

   This policy selects all endpoints that have the label running-calico: true, and enforces a single ingress allow rule. The ingress rule allows traffic to port 9091 from any source with the label calico-prometheus-access: true, meaning all Calico Enterprise workload endpoints, host endpoints, and global network sets that have the label will be allowed access.

   Then, use kubectl to apply this policy.

   kubectl apply -f calico-prometheus-policy.yaml

4. Apply labels to any endpoints that should have access to the metrics.

   At this point, only endpoints that have the label calico-prometheus-access: true can reach Calico Enterprise's Prometheus metrics endpoints on each node. To grant access, simply add this label to the desired endpoints.

   For example, to allow access to a Kubernetes pod you can run the following command.

   kubectl label pod my-prometheus-pod calico-prometheus-access=true

   If you would like to grant access to a specific IP address in your network, you can create a global network set using kubectl.

   For example, creating the following network set would grant access to a host with IP 172.15.0.101.

   apiVersion: projectcalico.org/v3
   kind: GlobalNetworkSet
   metadata:
     name: calico-prometheus-set
     labels:
       calico-prometheus-access: 'true'
   spec:
     nets:
       - 172.15.0.101/32

Additional steps for Typha deployments

If your Calico Enterprise installation uses the Kubernetes API datastore and has greater than 50 nodes, it is likely that you have installed Typha. This section shows how to use an additional network policy to secure the Typha Prometheus endpoints.

After following the steps above, create a file named typha-prometheus-policy.yaml with the following contents.

apiVersion: projectcalico.org/v3
kind: GlobalNetworkPolicy
metadata:
  name: restrict-typha-prometheus
spec:
  # Select all Calico Enterprise nodes.
  selector: running-calico == "true"
  order: 500
  types:
    - Ingress
  ingress:
    - action: Allow
      protocol: TCP
      source:
        selector: calico-prometheus-access == "true"
      destination:
        ports:
          - 9093

This policy selects all endpoints that have the label running-calico: true, and enforces a single ingress allow rule. The ingress rule allows traffic to port 9093 from any source with the label calico-prometheus-access: true, meaning all Calico Enterprise workload endpoints, host endpoints, and global network sets that have the label will be allowed access.

Then, use kubectl to apply this policy.

kubectl apply -f typha-prometheus-policy.yaml

Example for kube-controllers

If your Calico Enterprise installation exposes metrics from kube-controllers, you can limit access to those metrics with the following network policy.

Create a file named kube-controllers-prometheus-policy.yaml with the following contents.

apiVersion: projectcalico.org/v3
kind: NetworkPolicy
metadata:
  name: restrict-kube-controllers-prometheus
  namespace: calico-system
spec:
  selector: k8s-app == "calico-kube-controllers"
  order: 500
  types:
    - Ingress
  ingress:
    - action: Allow
      protocol: TCP
      source:
        selector: calico-prometheus-access == "true"
      destination:
        ports:
          - 9094

Then, use kubectl to apply this policy.

kubectl apply -f kube-controllers-prometheus-policy.yaml