eBPF use cases

Big picture

Learn when to use eBPF (and when not to).

What is eBPF?

eBPF is a feature available in Linux kernels that allows you to run a virtual machine inside the kernel. This virtual machine allows you to safely load programs into the kernel, to customize its operation. Why is this important?

In the past, making changes to the kernel was difficult: there were APIs you could call to get data, but you couldn’t influence what was inside the kernel or execute code. Instead, you had to submit a patch to the Linux community and wait for it to be approved. With eBPF, you can load a program into the kernel and instruct the kernel to execute your program if, for example, a certain packet is seen or another event occurs.

With eBPF, the kernel and its behavior become highly customizable, instead of being fixed. This can be extremely beneficial, when used under the right circumstances.

Calico Enterprise and eBPF

Calico Enterprise offers an eBPF data plane as an alternative to our standard Linux dataplane (which is iptables based). While the standard data plane focuses on compatibility by working together with kube-proxy and your own iptables rules, the eBPF data plane focuses on performance, latency, and improving user experience with features that aren’t possible with the standard data plane.

But Calico Enterprise doesn’t only support standard Linux and eBPF; it currently supports a total of three data planes, including Windows HNS, and has plans to add support for even more data planes in the near future. Calico Enterprise enables you, the user, to decide what works best for what you want to do.

If you enable eBPF within Calico Enterprise but have existing iptables flows, we won’t touch them. Because maybe you want to use connect-time load balancing, but leave iptables as is. With Calico Enterprise, it’s not an all-or-nothing deal—we allow you to easily load and unload our eBPF data plane to suit your needs, which means you can quickly try it out before making a decision. Calico Enterprise offers you the ability to leverage eBPF as needed, as an additional control to build your Kubernetes cluster security.

Use cases

There are several use cases for eBPF, including traffic control, creating network policy, and connect-time load balancing.

Traffic control

Without eBPF, packets use the standard Linux networking path on their way to a final destination. If a packet shows up at point A, and you know that the packet needs to go to point B, you can optimize the network path in the Linux kernel by sending it straight to point B. With eBPF, you can leverage additional context to make these changes in the kernel so that packets bypass complex routing and simply arrive at their final destination.

This is especially relevant in a Kubernetes container environment, where you have numerous networks. (In addition to the host network stack, each container has its own mini network stack.) When traffic comes in, it is usually routed to a container stack and must travel a complex path as it makes its way there from the host stack. This routing can be bypassed using eBPF.

Creating network policy

When creating network policy, there are two instances where eBPF can be used:

• eXpress Data Path (XDP) – As a raw packet buffer enters the system, eBPF gives you an efficient way to examine that buffer and make quick decisions about what to do with it.

• Network policy – eBPF allows you to efficiently examine a packet and apply network policy, both for pods and hosts.

Connect-time load balancing

When load balancing service connections in Kubernetes, a port needs to talk to a service and therefore network address translation (NAT) must occur. A packet is sent to a virtual IP, and that virtual IP translates it to the destination IP of the pod backing the service; the pod then responds to the virtual IP and the return packet is translated back to the source.

With eBPF, you can avoid this packet translation by using an eBPF program that you’ve loaded into the kernel and load balancing at the source of the connection. All NAT overhead from service connections is removed because destination network address translation (DNAT) does not need to take place on the packet processing path.

The price of performance

So is eBPF more efficient than standard Linux iptables? The short answer: it depends.

If you were to micro-benchmark how iptables works when applying network policies with a large number of IP addresses (i.e. ipsets), iptables in many cases is better than eBPF. But if you want to do something in the Linux kernel where you need to alter the packet flow in the kernel, eBPF would be the better choice. Standard Linux iptables is a complex system and certainly has its limitations, but at the same time it provides options to manipulate traffic; if you know how to program iptables rules, you can achieve a lot. eBPF allows you to load your own programs into the kernel to influence behavior that can be customized to your needs, so it is more flexible than iptables as it is not limited to one set of rules.

Something else to consider is that, while eBPF allows you to run a program, add logic, redirect flows, and bypass processing—which is a definite win—it’s a virtual machine and as such must be translated to bytecode. By comparison, the Linux kernel’s iptables is already compiled to code.

As you can see, comparing eBPF to iptables is not a straight apples-to-apples comparison. What we need to assess is performance, and the two key factors to look at here are latency (speed) and expense. If eBPF is very fast but takes up 80% of your resources, then it’s like a Lamborghini—an expensive, fast car. And if that works for you, great (maybe you really like expensive, fast cars). Just keep in mind that more CPU usage means more money spent with your cloud providers. So while a Lamborghini might be faster than a lot of other cars, it might not be the best use of money if you need to comply with speed limits on your daily commute.

When to use eBPF (and when not to)

With eBPF, you get performance—but it comes at a cost. You need to find a balance between the two by figuring out the price of performance, and deciding if it’s acceptable to you from an eBPF perspective.

Let’s look at some specific cases where it would make sense to use eBPF, and some where it would not.

When not to use eBPF

✘ Packet-by-packet processing

Using eBPF to perform CPU intensive or packet-by-packet processing, such as decryption and re-encryption for encrypted flows, would not be efficient because you would need to build a structure and do a lookup for every packet, which is expensive.

When to use eBPF

✔ XDP

eBPF provides an efficient way to examine raw packet buffers as they enter the system, allowing you to make quick decisions about what to do with them.

✔ Connect-time load balancing

With eBPF, you can load balance at the source using a program you’ve loaded into the kernel, instead of using a virtual IP. Since DNAT does not need to take place on the packet processing path, all NAT overhead from service connections is removed.

✔ Building a service mesh control plane

Service mesh relies on proxies like Envoy. A lot of thought has gone into designing this process over the years. The main reason for doing it this way is that, in many cases, it is not viable to do inline processing for application protocols like HTTP at the high speeds seen inside a cluster. Therefore, you should think of using eBPF to route traffic to a proxy like Envoy in an efficient way, rather than using it to replace the proxy itself. However, you do need to turn off connect-time load balancing (CTLB) so sidecars can see the service addresses. Given you are already taking a performance hit by the extra hop to the sidecar, not using CTLB performance optimization to avoid NAT overhead is likely not a big deal.

Summary

Is eBPF a replacement for iptables? Not exactly. It’s hard to imagine everything working as efficiently with eBPF as it does with iptables. For now, the two co-exist and it’s up to the user to weigh the price-performance tradeoff and decide which feature to use when, given their specific needs.

We believe the right solution is to leverage eBPF, along with existing mechanisms in the Linux kernel, to achieve your desired outcome. That’s why Calico Enterprise offers support for multiple data planes, including standard Linux, Windows HNS, and Linux eBPF. Since we have established that both eBPF and iptables are useful, the only logical thing to do in our opinion is to support both. Calico Enterprise gives you the choice so you can choose the best tool for the job.

Additional resources

To learn more and see performance metrics from our test environment, see the blog, Introducing the eBPF dataplane.